Once again， weekly inspections should be conducted to check whether the connecting screws at various parts of the lifting platform are tightened， whether the sealing rings are damaged or ineffective， whether there is a lack of hydraulic oil， and whether the oil cylinder is leaking. It is necessary to clean the lifting frame， scissors， wiring， which should be able to cut off the power supply before the suspension cage and other mechanical stop devices (such as buffers)
Buffer. In order to increase the energy for the car to hit the top or sink to the bottom. Remove rubber or sponge from the buffer and cabin to increase their impact energy; Rope groove slipping and other accidents caused the car to suddenly fall， resulting in a safety clamp. To prevent breakage of the lifting wire rope. A safety clamp that can simultaneously cut off the power supply and stop the car from falling should be removed from the car. A car without safety tongs is not allowed to ride or carry people. If it is a simple electric elevator， there should be a safety device (such as a safety stop pin) to prevent people from suddenly falling when loading and unloading goods in the car; Electric elevators with three or more floors (including three floors) for passengers or passengers.
GedaiAcceptance: Concrete strength grade C， strength testing report.
During the use period， the user unit should organize professional technical personnel to inspect the construction electric elevator monthly according to the standard requirements， and record the inspection results.
Setting requirements: The spacing of wall brackets along the vertical direction should comply with the provisions of the user manual.
When the door is closed， except for the gap between the lower part of the door that should not exceed mm，VillebanElectric single arm elevator， as well as the gap around the door or the gap between parts， should comply with the provisions of Table of GB -.
The use of fully autonomous electric elevators can create more benefits and ensure safety in all aspects.
When applying a normal force of N to any position on either side of the door using a rigid mm square or circular flat surface in the locked position of the landing door， the door should be able to withstand and have no deformation; - Deformation not exceeding mm; After the test， it worked normally.
High quality brandThe bearing capacity of the ground under the concrete foundation plate should be greater than .Mpa.
To meet the needs of choreographers and choreographers in different plays， different heights of the lifting platform can be used to change the shape of the stage according to the requirements of the choreographers and choreographers， in order to adapt to the requirements of the plot for the scenery or venue， and save manpower and material resources for setting up. By using the tilting device of the lifting platform to form a tilted platform， a better highlighting effect can be achieved in various performances. According to the needs of the plot， special atmosphere and effects can be created. Even simple stage machinery often participates in performance activities， creating unexpected atmosphere and effects according to the needs of the plot. For example，VillebanElectric three wheel elevator， using the low-speed descent of the lifting platform to represent a sunken ship in the sea using the valves on the lifting platform and the sudden disappearance and appearance of actors on the lifting platform.
Work is essential， and the main protective accessories include safety belts， guardrails，VillebanElectric mobile hydraulic elevator， protective covers， platforms and stairs， etc.
The angle between the wall bracket and the horizontal plane should comply with the requirements of the user manual.
property rightAfter the electric elevator passes the inspection the user unit shall organize the leasing unit， installation unit， and supervision unit to conduct acceptance. For the implementation of construction general contracting， the acceptance shall be organized by the construction general contracting unit. The acceptance form should be signed by the relevant responsible person.
Equal effect.
Civil engineering advantages: The pit depth of the guide rail type lifting platform is generally around -mm， and the top layer is not affected. It can be customized according to the location and environment.
VillebanDuring the use period， the user unit should organize professional technical personnel to inspect the construction electric elevator monthly according to the standard requirements， and record the inspection results.
The connection method and angle between the wall bracket and the building structure should comply with the requirements of the user manual.
Tank oil temperature protection: When the oil temperature in the tank exceeds the standard setting value， the oil temperature protection device sends a signal to suspend the use of the elevator. The elevator can only be started when the oil temperature drops
